Main Parameter | |||
Wheelbase | Cabin | 2+3(Person) | |
Emission Standard | GB17691-2018 NATIONAL EMISSION Ⅵ | Max. Speed | 110(km/h) |
ITME | PARAMETER |
PARAMETER | |
working speed | Trimming operation travel speed:1~10km/h |
Safety | Vehicle has safety guard |
Working mode | truck mounted type |
Engine system | |
Engine | Famous brand diesel engine of the same level or above |
Power(kw) | ≥22 |
Battery | Voltage:12V |
Capacity:60Ah | |
Hydraulic pump | variable displacement piston pump |
Hydraulic pump pressure | 925Mpa |
Control system | |
Hydraulic control | The full hydraulic system can control oil cylinder, blade, motor, horizontal rotation of the whole machine and etc. The blade is independently controlled by hydraulic motor which is safer. |
Hydraulic motor | BYM-50 |
Rotation speed(rpm) | 3200 |
Base | Driven by a hydraulic motor, the base can rotate 360°to meet different working condition. |
Hydraulic motor pressure | 25Mpa |
remote controller | Operated by 24-point radar multi-function remote controller, safer |
remote control distance(m) | 50 |
Job performance parameter: | |
Cutting tool | There are two kinds of cutters, circular saw and straight knife, with different trimming conditions:circular saw, 2 pcs/set, trimming trees, trimming diameter:φ15cm. Straight knife,3 pcs/set, trimming hedges and dividers, trimming diameter:φ3cm. |
Cutter | The cutter head can rotate 360 degrees to meet all angles of trimming. |
Trimming height(mm) | -1000~6600 |
Max. Horizontal trimming distance | 5450mm(from the center of rotation) |
Trim horizontal hedgerow working height(m) | 0~3.5 |
working width(mm) | 1800 |
the turning angle of cutter head | 360° |